Start GoToWebinar Integrated Audio

Review instructions on how to manage your audio broadcast.

• VoIP and Telephone: If you have selected the option to use either VoIP or Telephone for your webinar, you will see the options Telephone and Mic & Speakers in your Control Panel. The default mode is Mic & Speakers; however, GoToWebinar will remember your selection for your next event.

• If you are joined via Mic & Speakers, you must click Start Broadcast to begin the audio portion of your webinar. Before starting the broadcast, you will be joined in a subconference with all other organizers and panelists you invited.

• Telephone: If you have selected the option to use Telephone only for your webinar, you must join the audio portion by dialing the conference number and providing the Access Code and Audio PIN noted in your Control Panel.
• If you are joined via the telephone, you must press *1 on your telephone keypad to begin the audio portion of your webinar. Before starting the broadcast, you will be joined in a subconference with all other organizers and panelists you invited.

To switch audio formats during a webinar

If you are using the GoToWebinar integrated audio, you can switch between using Mic & Speakers or Telephone. In the Audio pane select either Telephone or Mic & Speakers.

On-Hold Beeps and Entry/Exit Chimes

On-Hold Beeps play when an attendee connects to a webinar before the organizer has started it, unless the organizer disables the beeps.

Entry/Exit Chimes play each time an attendee joins or leaves the webinar, unless the organizer turns the chimes off.

To toggle On-Hold Beeps or Entry/Exit Chimes on and off, click Edit in the GoToWebinar Audio pane, then click each item to turn it on or off.

| Views: 10053 | Last Updated: Thu, May 16 2013 2:51 PM

Is this article helpful?